History Lesson: What Is a .stc File? The Spreadsheet OpenOffice Copied Before You Typed
OpenOffice.org 1.x saved its fill-in-the-blanks spreadsheets as .stc: the same zipped XML as a .sxc, opened as an untitled copy so the original stayed clean. LibreOffice still opens them; Excel does not list them.

TL;DR
A .stc file is a Calc template from OpenOffice.org 1.x and StarOffice 6 and 7, the generation that ran from 2002 to 2005: a ready-made starting spreadsheet — headings, formulas, styles, sometimes an example sheet — that opens as a fresh, untitled copy instead of itself. On disk it is the same ZIP archive of XML files as a .sxc spreadsheet. OpenOffice.org 2.0 replaced it with .ots in 2005, and LibreOffice removed it from Save As in 2014 but still opens it. Excel’s list of supported formats does not include it. One warning: star catalogs for the Celestia space simulator and solder-mask layers from the EAGLE circuit-board program use .stc too.
What is a .stc file?
A template is a document meant to be copied rather than edited: an invoice with the formulas already in place, a timesheet with the overtime math built in, a budget with the months filled across the top. In OpenOffice.org 1.x, Calc kept its templates in .stc files and its ordinary spreadsheets in .sxc, the format told in History Lesson: What Is a .sxc File?. Writer, Impress, and Draw had their own template extensions: .stw, .sti, and .std.
OpenOffice.org’s own table of file types gives .stc the media type application/vnd.sun.xml.calc.template — a media type, or MIME type, is the label programs use to say what kind of file something is — with the note “This mime content type will be used for Calc 6.0 templates.” The 6.0 matches StarOffice 6.0, the commercial release built on OpenOffice.org 1.0. LibreOffice still recognizes the type under the names “Calc 6.0 Template” and “OpenOffice.org 1.0 Spreadsheet Template.”
What makes a template different is what happens when you open it. The templates chapter of LibreOffice’s Writer Guide explains that a document created from a template opens as “Untitled” followed by a number, and that double-clicking a template in your file browser creates a new document rather than opening the template for editing. The template stays clean for the next person. That is also behind a common surprise: you open a .stc, type a month of figures, press Save, and are asked for a new name.
How do I open a .stc file today?
Not in Excel, as a rule. Microsoft’s support page on file formats supported in Excel lists OpenDocument Spreadsheet (.ods) but not the OpenOffice.org 1.x formats .sxc and .stc that came before it. Excel’s own templates are .xltx and .xlt, a different family. LibreOffice’s Getting Started Guide, on the other hand, lists “OpenOffice.org 1.x (.sxc and .stc)” among the spreadsheet formats Calc can open. Open the file in LibreOffice Calc and save the copy as .xlsx for Excel, as .ods for an ordinary spreadsheet, or as .ots if you want to keep using it as a template.
Renaming it will not help
Changing .stc to .xltx or .ots in File Explorer does not convert anything. An Excel template is a different kind of ZIP package, and an OpenDocument template uses newer XML names inside. Open the .stc in a program that reads it and save a copy in the format you need.
How the bytes work: a .sxc with a different job
A .stc starts with the letters PK, the signature of a ZIP archive. Inside are a short file called mimetype, the cells in content.xml, the cell and page styles in styles.xml, the title and author in meta.xml, view settings in settings.xml, and a list of every part in META-INF/manifest.xml. That is the same layout as a .sxc. The OpenOffice.org XML file format manual from December 2002 also defines a meta:template element, which records the address of the template a document was created from.
To see real ones, we downloaded two Calc templates from OpenOffice.org’s own documentation site, using copies kept by the Internet Archive. In both, the mimetype entry said application/vnd.sun.xml.calc, the plain spreadsheet type, not the template type; in these files, the .stc extension is what marks them as templates. Apache OpenOffice 4.1.17 still treated both as templates and opened each one as “Untitled 1.” Both also carried a meta:template link to a .vor file in an OpenOffice.org program folder. .vor was the extension StarOffice 5 used for templates of every kind — OpenOffice.org’s file type table says there is no media type for .vor “because this extension will used for templates in general” — so these 2002 templates had apparently been made from older StarOffice templates. The Balance Sheet’s parent was dated November 2000.
2002–2005: templates for the first free OpenOffice.org
StarOffice was built by the German company Star Division. Sun Microsystems bought it in August 1999, released the code as open source in July 2000, and shipped OpenOffice.org 1.0 on 1 May 2002 with the new XML file formats, .stc among them. The OpenOffice.org documentation project collected templates for the new suite, with a short instruction: “These files should be placed in your %OpenOffice.org%/user/template directory.” Its Calc entries were a Balance Sheet, a Marketing Plan with sales forecast, marketing budget, and operating budget sheets, and a Timesheet that calculates regular and overtime hours and charts them.
The files themselves keep their own history. In our own test, meta.xml in both the Balance Sheet and the Marketing Plan gave Scott Carr as the author and 1 December 2002 as the creation date, written by a program that called itself “OpenOffice.org 643 (Win32)”; the Internet Archive first saved the Marketing Plan a week later. The Balance Sheet has three sheets, Intro, Template, and Example, with 16 formulas. The Marketing Plan has four sheets and 772 formulas, plus a few empty macro stubs in StarBasic, the macro language of StarOffice and OpenOffice.org.
The format lasted three and a half years. OpenOffice.org 2.0, released on 20 October 2005, made OpenDocument its default, and Calc templates became .ots, OpenDocument Spreadsheet Template. The story of that standard is in History Lesson: What Is a .ods File?.
2013–2014: dropped from Save As, kept for opening
LibreOffice inherited the .stc filter in 2010 and could save to it for its first few years. On 7 November 2013, developer Bryan Quigley made a proposal on the LibreOffice developers’ mailing list about the Save As list: “Remove all of the ‘OpenOffice.org 1.0’ file formats. People may think they should use this to communicate with OpenOffice users.” Three days later he stressed that he was “just removing Write support ONLY”: “You would still be able to open them and save them as newer formats.” Not everyone was convinced — one developer replied that support should not be removed without a technical reason — but the change, “Remove OOo1.0 file formats from Save As,” is dated 10 November 2013 and reached users in LibreOffice 4.2.4 in 2014.
That is still how it works. In the configuration of LibreOffice 25.2, the .stc filter is marked for import and templates but not export, and when we asked LibreOffice 25.2.3 to save a .stc, it refused. Apache OpenOffice, the other descendant of OpenOffice.org, still keeps the export: in our own test, Apache OpenOffice 4.1.17 saved a .stc without complaint, and its mimetype entry also read application/vnd.sun.xml.calc.
Not every .stc is a spreadsheet
The Celestia space simulator keeps star definitions in plain-text .stc star catalog files, and EAGLE’s widely copied job for making Gerber files — the layer files circuit-board makers manufacture from — writes the top solder mask as .stc. A Calc template is a ZIP archive whose first two bytes are PK; if Notepad shows readable star names or plotter commands instead, it is not a spreadsheet and needs the program that made it.
Why .stc files still exist in 2026
Templates outlive the documents made from them. They get copied from one user profile to the next, shared in “forms” folders at schools, clubs, and small offices, and passed around on template sites of the era. OpenOffice.org’s documentation page still lists its three Calc templates today, although when we checked on 16 November 2026 the download links returned a web page instead of the files. Whoever finds a .stc now usually wants what it holds — the layout, the formulas, the categories someone worked out twenty years ago — and these legacy files are often the only copy.
Legacy File Converter lists .stc (OpenOffice Calc template) among supported spreadsheets on Supported File Types and converts it on your own Windows PC — to XLSX for Excel, ODS, CSV when only the values matter, or PDF — without uploading it anywhere. The result is an ordinary spreadsheet rather than a template, so keep the original .stc as well. For the spreadsheet generation before it, see History Lesson: StarCalc (.sdc).
Related reading
Ready to open your old files?
Start free, then unlock unlimited conversions with a one-time $79.95 Standard license. Download the Windows installer — full features for up to 10 files.
Free trial
Full app features · up to 10 files
Windows 10 or 11
Free trial — convert up to 10 files. Download the Windows installer and convert locally on your PC.
Direct Windows installer · offline MSI
Is this safe? — publisher, installer, and SmartScreen help
Requires Windows 10 or 11. No subscriptions.